Weld Monitor - Resistance Welding Controller

 

 

Forwel - Kirti Smart Weld Monitor gives you 100 % Certainty of Welded Spots


weld monitorWelding

Buzzer alarm   weld monitor gives Zero Rejection  


Weld Monitor - In FORWEL–Kirti Spot Welding Controller you can set the values of parameters and welding current as well as lower and upper limit of current after validation. The smart weld monitor continuously checks each spot for quality within set parameters.

During the process the weld monitor takes feedback after every half cycle and verifies the set welding current and other parameters. If the values are not as per the settings the corrections are applied in the next half cycle of the process.

This quick response time of the constant current secondary feedback welding controller maintains process consistency.

The weld monitor gives buzzer alarm and flashes beacon light which is installed over the machine if the spot is above or below of set permissible current limit. Thus faulty welding is detected instantaneously.

With this smart weld monitor you can weld on the spot and check on the spot.

The spot weld controller thus keeps the complete process under control.

............................................................................................................................................

 

 

Designed By - Rutuj Worth Concepts